Astrology BasicsOctober 26, 2026· 6 min read

Tara Bala: Counting From Your Birth Nakshatra

Quick Answer

Tara Bala rates a day by counting from your birth nakshatra to the day's nakshatra. How to count, the nine taras and how sources label them, a worked week in Delhi for a Rohini birth, what to do when the nakshatra changes after sunrise, and how the same count scores Tara in Guna Milan.

By Amritanshu Kumar Gaurav


Tara Bala ("strength of the star") is a quick check that panchang users make before picking a day. It counts from your birth nakshatra to the nakshatra of the day, and the count gives one of nine taras, each labelled favourable or unfavourable. Muhurta practice uses it alongside other factors, such as Chandra Bala, the Moon's sign counted from your Moon sign. This lesson shows how to count, works through one week, and points out where sources disagree.

AstroMystra does not have a Tara Bala tool. You need two things: your birth nakshatra, from the Nakshatra Calculator, and the day's nakshatra, from Today's Panchang or any printed panchang. What a nakshatra is, and how the Moon's degree becomes one, is covered in The 27 Nakshatras and Nakshatra Pada: A Degree-by-Degree Worksheet.

How to count

  1. Find your birth nakshatra (the Moon's nakshatra at birth) and the day's nakshatra.
  2. Count forward from your birth nakshatra to the day's nakshatra, in the order of the 27, counting both ends. Your own nakshatra is 1, the next is 2, and so on. If the day's nakshatra comes earlier in the list, carry on past Revati to Ashwini.
  3. Divide the count by 9 and keep the remainder. A remainder of 0 means 9.

The remainder is the tara.

The nine taras

The names below are the ones used by DekhoPanchang and Shubh Panchang. The labels are Shubh Panchang's.

  1. Janma (birth): not good
  2. Sampat (wealth): very good
  3. Vipat (danger), also written Vipata: bad
  4. Kshema (well-being): good
  5. Pratyari (obstacle): not good
  6. Sadhaka (achievement): very good
  7. Vadha (death), also called Naidhana: totally bad
  8. Mitra (friend): good
  9. Ati-Mitra (great friend), also called Param Mitra: good

So 2, 4, 6, 8 and 9 count as favourable, and 3, 5 and 7 as unfavourable. Janma is labelled unfavourable too. DekhoPanchang notes that regions differ on whether that applies with equal force in the second and third rounds of nine.

Every tara comes round three times

There are 27 nakshatras and 9 taras, so each tara covers three nakshatras, nine apart. For someone born in Rohini:

  • Janma: Rohini, Hasta, Shravana
  • Sampat: Mrigashira, Chitra, Dhanishta
  • Vipat: Ardra, Swati, Shatabhisha
  • Kshema: Punarvasu, Vishakha, Purva Bhadrapada
  • Pratyari: Pushya, Anuradha, Uttara Bhadrapada
  • Sadhaka: Ashlesha, Jyeshtha, Revati
  • Vadha: Magha, Mula, Ashwini
  • Mitra: Purva Phalguni, Purva Ashadha, Bharani
  • Ati-Mitra: Uttara Phalguni, Uttara Ashadha, Krittika

Write this list once for your own nakshatra and you no longer need to count. Every day's nakshatra falls in one row.

A worked week: Delhi, 16 to 22 November 2026

Take a fictional person born in Rohini. These are the nakshatras at sunrise in Delhi for one week, as AstroMystra calculates them, with the tara each one gives:

  • Mon 16 Nov (sunrise 06:44): Shravana, count 19, Janma
  • Tue 17 Nov (06:45): Dhanishta, count 20, Sampat
  • Wed 18 Nov (06:46): Shatabhisha, count 21, Vipat
  • Thu 19 Nov (06:47): Purva Bhadrapada, count 22, Kshema
  • Fri 20 Nov (06:48): Purva Bhadrapada, count 22, Kshema
  • Sat 21 Nov (06:48): Uttara Bhadrapada, count 23, Pratyari
  • Sun 22 Nov (06:49): Ashwini, count 25, Vadha

Rohini is the 4th nakshatra and Shravana the 22nd, so the first count is 22 − 4 + 1 = 19, and 19 ÷ 9 leaves 1: Janma. Ashwini comes before Rohini in the list, so that count runs on past Revati. Rohini to Revati is 24, and Ashwini is the 25th. 25 ÷ 9 leaves 7: Vadha. The list in the previous section gives the same answers without any arithmetic.

When the nakshatra changes during the day

A panchang names a day by the nakshatra running at sunrise, but the Moon leaves a nakshatra roughly once a day, often after sunrise. In this week:

  • Dhanishta begins at 02:16 on 17 November and Shatabhisha at 04:34 on 18 November, both before sunrise, so those days are simple.
  • Purva Bhadrapada begins at 06:10 on 19 November, just before sunrise, and runs until 06:56 on 20 November, eight minutes after sunrise. From then on, the tara for a Rohini birth is Pratyari, not Kshema.
  • Uttara Bhadrapada names 21 November, but Revati begins at 06:50, two minutes after sunrise. For most of that day the tara is Sadhaka, one of the best, not Pratyari.
  • Revati in turn ends at 05:54 on 22 November, before sunrise, so Revati never names a day this week at all.

Neither DekhoPanchang nor Shubh Panchang says which nakshatra to use when it changes during the day. Muhurta practice generally looks at the nakshatra running at the time of the activity, not at sunrise. If you use Tara Bala for a particular hour, check that the nakshatra is still running at that hour. AstroMystra's Today's Panchang shows when the sunrise nakshatra ends and which one follows, so you can check the hour; Reading a Panchang's Timings explains how to read those times.

The same count in Guna Milan

Tara Bala's count also appears in kundli matching. The Tara koota, worth 3 of the 36 points in Ashtakoot Guna Milan, makes the same count in both directions: from the bride's nakshatra to the groom's and back. Each direction that lands on Sampat, Kshema, Sadhaka, Mitra or Ati-Mitra earns 1.5 points. That is how AstroMystra's Guna Milan calculator scores it, and Ashtakoot Score Worksheet works through all eight kootas.

What Tara Bala does not tell you

Tara Bala is one input to a traditional choice of day. Muhurta practice weighs it with Chandra Bala, the tithi, the weekday and other factors, and different traditions weigh it differently. There is no evidence that a Vipat or Vadha day causes harm, or that a Sadhaka day makes things succeed. If you follow the custom, use it to choose between days that already suit you, not to put off something that matters.

Try it yourself

  1. Your birth nakshatra is Magha. What is the tara on a Swati day?
  2. Your birth nakshatra is Revati. What is the tara on a Bharani day?
  3. In Guna Milan, one partner was born in Rohini and the other in Swati. How many Tara koota points does the pair get?

Answers.

  1. Magha is the 10th nakshatra and Swati the 15th, so the count is 15 − 10 + 1 = 6. That is Sadhaka.
  2. Count past the end of the list: Revati 1, Ashwini 2, Bharani 3. That is Vipat.
  3. From Rohini to Swati is 15 − 4 + 1 = 12, which leaves 3: Vipat, 0 points. From Swati to Rohini runs on past Revati: 27 − 15 + 1 + 4 = 17, which leaves 8: Mitra, 1.5 points. The pair gets 1.5 of 3.

Sources

  • The count and the names: DekhoPanchang, "Tarabalam" (dekhopanchang.com/en/learn/tarabalam), which gives the inclusive count, the nine names, the regional note on Janma and attributes Tara Bala to the muhurta text Muhurta Chintamani; Shubh Panchang, "Tara Balam" (shubhpanchang.com/panchang/tara-balam), for the favourable and unfavourable labels.
  • The Tara koota: the standard Ashtakoot scheme, as set out in Ashtakoot Score Worksheet.
  • What is AstroMystra's: the worked week, the Rohini list and the exercises are our own. Every sunrise time, nakshatra, change time and count in this lesson is recomputed from AstroMystra's panchang and Guna Milan code each time the site's code is checked.

Curious how these interpretations are calculated? See our Methodology.

Notice an error in this article? Report a correction

Apply what you've learned

Ready to read your own chart?

Get your personalised AI birth chart, numerology reading, and daily horoscope — free to start.

Get Your Free Reading